[cisco-voip] E-911 setup ERL information

[Voice Noob]

CUCM 7.x with Emergency Responder 7.x.  I have all of the translations and
locations setup working correctly. My problem is with the local PSAP
operator. The place I am setting up is a large campus but the local Telco
did not offer PRI's or CAMA trunks before this installation. This customer
has enough clout locally to get the Telco to get the equipment so they can
have PRI's because they wanted to implement E-911 to the police even though
there is no law requiring it yet.  Now when I try to export my location
information the local PSAP administrator does not know what to do with it.
He states that all of that is handled by AT&T at the MSAG. I don't know what
MSAG is but it sounds like that is where I need to go.  Does anyone know of
a standard way to export the information that AT&T would accept. I think I
have hit a brick wall locally. 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090612/00035c64/attachment.html>