[cisco-voip] Paging system

[Patrick Aland]

It will depend on what was purchased. By default most of the Valcoms  
require FXO however you use a Valcom 9970 to enable an FXS port to be  
used.

--Patrick



On Jun 23, 2009, at 12:44 PM, Voice Noob wrote:

> “It should just connect and work” J
>
> I think you need an FXO port not an FXS which is on the ATA. I have  
> only used FXO ports on Valcom’s before.
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net 
> ] On Behalf Of Lisa Notarianni
> Sent: Tuesday, June 23, 2009 11:42 AM
> Cc: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Paging system
>
> We installed a Valcom paging system for overhead paging.  We used an  
> ATA to connect to it.  Programmed a speed dial button to the ATA.   
> Vendor that installed paging system thinks it is a Call manager  
> issue.  Our technician said he tested and ATA works fine.  It should  
> just connect and work.  Is there anything else we could do?
> -- 
> <image001.gif>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090623/a26ff0ad/attachment.html>