[cisco-voip] How to Configure Site Codes

[Scott Voll]

Very easily done via a translation rule via a partition.

Scott

On Tue, May 5, 2009 at 2:30 PM, gin Murray <kinusca at gmail.com> wrote:

> Hi
>
> I have a centralized CCM with remote sites having their Own Gateway and
> Different Partitions.
>
> I want to assign a site-code to each of teh sites, so that we can take care
> of the Overlapping extension numbering Plan.
>
> Site A to dial Site B will dial *30 followed by SiteB's extnsion No
>  Site A to dial Site C will dial *31 followed by SiteC's extnsion No
>  Site C to dial Site B will dial *32 followed by SiteB's extnsion No
>  Site C to dial Site A will dial *33 followed by SiteA's extnsion No
>
> I Donot have a gatekeeper, can someone please help me.
>
> Thnaks in advance.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090505/ab2953c4/attachment.html>