[cisco-voip] Downloading capture files from CUCM?

[Erick Bergquist]

Ok,

Thanks everyone.  It is a CUCM 6.11 system and I tried with RTMT for
that version and a RTMT install from 7.0.2 I have and both the RTMT
did not have a Packet Capture item under the trace collection screens
(I checked 2-3 times). I did browse the Platform CLI traces via RTMT
and in RTMT it just showed cli#####.log/txt files.

On Wed, May 6, 2009 at 9:37 PM, Wes Sisk <wsisk at cisco.com> wrote:
> From the CLI help:
>
> admin:utils network capture ?
> Syntax:
> utils network capture [options]
> options  optional    page,numeric,file fname,count num,size bytes,src
> addr,dest addr,port num,host protocol addr
>
>
> options are:
> page                  - pause output
> numeric               - show hosts as dotted IP addresses
> file fname            - output the information to a file
>   Note: The file will be saved in platform/cli/fname.cap
>
> so:
> file get activelog platform/cli/*
>
> otherwise I believe RTMT in later versions gets these when you collect CLI
> logs or offers a specific checkbox for packet captures
>
>
> /Wes
>
> On Wednesday, May 06, 2009 5:51:23 PM, Erick Bergquist <erickbee at gmail.com>
> wrote:
>>
>> How does one download the capture files made when using the utils
>> network capture eth0 file command?  I looked all over RTMT and the CLI
>> and can't find out where.
>>
>> Thanks, Erick
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>