[cisco-voip] Swapping an FXO card for a T1 card in a Cisco Router2600

[Matt Slaga (US)]

With a 2600, you need a NM-2V with DSP resources in order to recognize
the card.  

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Miller, Steve
Sent: Tuesday, May 12, 2009 2:05 PM
To: Cisco VOIP
Subject: [cisco-voip] Swapping an FXO card for a T1 card in a Cisco
Router2600

 

Is there anything special I need to do in order to install an FXO card
into a slot where there is currently a T1 card?  I shut down the router
(a test router), removed the T1 card and installed the FXO, but the
system doesn't seem to recognize it.  Do I need to reprogram something?
I am a total novice at routers.  Any help would be great.  Thanks.

 

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com 

 

--------------------------------------------------------
This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s)
named above. This communication may contain material protected by
attorney-client, work product, or other 
privileges. If you are not the intended recipient or person responsible
for delivering this confidential
communication to the intended recipient, you have received this
communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of
this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor
any communication that is created, 
received, or sent on its network.  If you have received this
confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the
original message. 
 
To reply to our email administrator directly, send an email to
postmaster at dicksteinshapiro.com
 
Dickstein Shapiro LLP
http://www.DicksteinShapiro.com
 
========================================================================
======



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090512/cba572cc/attachment.html>