[cisco-voip] Restarting NTP on CUCM 6.1.3 subscriber?

[Jason Burns]

Check NTP on the subscriber by using

utils ntp config

utils ntp status

send us the output if it doesn't make immediate sense.

If ntp shows as stopped for some reason you can use

utils ntp start

I think cluster manager may sync over the NTP info, but I'm not sure. You
could try restarting that, and if still no luck, restarting the server.


On Wed, May 20, 2009 at 4:49 PM, Erick Bergquist <erickbee at gmail.com> wrote:

> The publisher is pointing to a NTP server which is accessible and
> working, but the subscriber server which uses the publisher server for
> NTP lists it as not accessible on the NTP settings page. I can ping
> the publisher by name and IP listed on the NTP Page from the
> subscriber server fine.
>
> I looked under services on the web page and SSH console and don't see
> a service I can restart relating to NTP or time. Is there anything I
> can do short of rebooting the server?
>
> Thanks, Erick
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090520/405af924/attachment.html>