[cisco-voip] Making QuickVPN Client Work With Pix Firewall

[A.L.M.Buxey at lboro.ac.uk]

Hi,
> Since there are a lot of very, very smart people out there, I'm putting this out there to see if any of you latent geniuses have figured this out.
> 
> We're trying to make the LinkSys QuickVPN Client work from behind a PIX firewall - including 501 and 506E -- that is running PAT.  If we set the computer up outside the firewall, it works just fine.  When we put it behind the firewall, it indicates it is making a connection and says its applying the policy and then hangs on verifying network.

does it use IPSec ? if so, your PIX will need to be set up to handle the
different IP types - GRE/AH etc

alan