[cisco-voip] configuring h323 gateway with cucm 6.1

[Scott Voll]

outbound is pots and the FXO / PRI / etc Port

inbound is VoIP and it's the CM ip address.

Scott

On Sat, Nov 7, 2009 at 11:26 AM, anand <anand.eee at gmail.com> wrote:

> Hi.
>
> I am very new to configuring CISCO UNIFIED COMMUNICATIONS MANGER (CUCM).
>
> I have CUCM 6.1 on central site.I have connected CUCM , phone and
> router(H323 gateway) to the switch.All the devices have ip addres from
> 10.10.10.1-31 with sunet mask of /27.
>
> On the remote site i have router(h323 gateway) , phone connected to
> switch.All the devices are on the network 10.10.10.33-63 with a subnet mask
> of /27.I want to register all the phones with call manger in the central
> site.
>
> Both the gateways are connected back to back.
>
> My question is on the remote site gateway, while configuring the dial peer
> session target which ip address should i give?
>
> Should i give the ip address of gateaway's ethernet interface or callmanger
> ip address.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091109/39c8050e/attachment.html>