[cisco-voip] E1 Card and Voice ports 3845

[Cumhur Kizilari]

Dear Martin,

Have you tried  "card type e1" command ?

Best Regards.
Cumhur KIZILARI

>
>
> On Wed, Nov 18, 2009 at 4:34 PM, CCIETalk.com <ccietalk at gmail.com> wrote:
>
>> Did you configure your controller E1?
>>
>> On 11/18/09, Martin Bufton <m.bufton at spectra-group.co.uk> wrote:
>> > Good afternoon.
>> >
>> >
>> >
>> > I need help with a PRI card, please.
>> >
>> >
>> >
>> > It is installed in a Cisco 3845 running C3845-SPServicesK9-M 12.4 (15)T9
>> >
>> > The card is a VWIC2-2MFT-T1/E1 installed in HWIC0
>> >
>> > I plan to use this as a MGCP gateway.
>> >
>> >
>> >
>> > I'm expecting to see the voice-ports in the configuration. but the
>> running
>> > configure doesn't show anything about the presence of the card.
>> >
>> >
>> >
>> > Show version reports "2 channelized (E1 or T1)/PRI ports"
>> >
>> >
>> >
>> > Thanks in advance
>> >
>> >
>> >
>> >
>>
>> --
>> Sent from my mobile device
>>
>> www.ccietalk.com
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091118/42fe1f2e/attachment.html>