[cisco-voip] Inbound PRI Calls Display "ID Unavailable"

[Berry, Matthew J.]

This is what I see.  From the looks of it, there is no name information.  However, I don't see a field where the ASCII name would be populated.

This was a call from 9522212814 coming into a circuit that delivered the last 4 digit of the DNIS.

Nov 18 16:22:05.841: ISDN Se0/1/0:23 Q931: RX <- SETUP pd = 8  callref = 0x1596
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98382
                Exclusive, Channel 2
        Calling Party Number i = 0x2183, '9522212814'
                Plan:ISDN, Type:National
        Called Party Number i = 0x80, '3748'
                Plan:Unknown, Type:Unknown
Nov 18 16:22:05.861: ISDN Se0/1/0:23 Q931: TX -> CALL_PROC pd = 8  callref = 0x9596
        Channel ID i = 0xA98382
                Exclusive, Channel 2
Nov 18 16:22:05.861: ISDN Se0/1/0:23 Q931: TX -> ALERTING pd = 8  callref = 0x9596
        Progress Ind i = 0x8088 - In-band info or appropriate now available
Nov 18 16:22:10.449: ISDN Se0/1/0:23 Q931: TX -> DISCONNECT pd = 8  callref = 0x88FA
        Cause i = 0x8090 - Normal call clearing
Nov 18 16:22:10.585: ISDN Se0/1/0:23 Q931: RX <- DISCONNECT pd = 8  callref = 0x1596
        Cause i = 0x8090 - Normal call clearing

Thanks,

Matthew Berry
Office 952 516 3748  |  Mobile 952 221 2814|  mjberry at krollontrack.com<mailto:agutzmer at krollontrack.com>

From: Madziarczyk, Jonathan [mailto:JMad at cityofevanston.org]
Sent: Wednesday, November 18, 2009 4:20 PM
To: Berry, Matthew J.; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Inbound PRI Calls Display "ID Unavailable"

You can easily check by doing a debug isdn q931 on gateway of the inbound trunk, repeat the call and you should see callerID with name info come through.

________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Berry, Matthew J.
Sent: Wednesday, November 18, 2009 2:24 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Inbound PRI Calls Display "ID Unavailable"

All -

I am working on a CUCM 6.2 cluster where all inbound calls display a "ID Unavailable" on the ringing phone.  We are running PRIs on MGCP gateways.

PSTN --> Internal Extension = Calling number, but no CID ("ID Unavailable")

I have looked through the CUCM 6.x Admin Guide, but could not figure out a place to make a change.  Could it be that our carrier is not sending CID?

Can someone point me in the right direction so I can figure this out?


Thanks,

Matthew Berry, Sr. Unified Communications Engineer, CCVP
Kroll Ontrack  |  9023 Columbine Road, Eden Prairie, MN 55347
952 516 3748  |  Fax 952 562 2175  |  Mobile 952 221 2814|  mjberry at krollontrack.com<mailto:agutzmer at krollontrack.com>
www.krollontrack.com<http://www.krollontrack.com/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091118/9439c271/attachment.html>