[cisco-voip] VWIC2-2MFT-T1/E1 for non-voice data ?

[Scott Voll]

Can I use a VWIC2-2MFT-T1/E1 for just a point to point data T1?

if so, how do I get the serial interfaces setup?  I can add card type, but
then I get a controller T1 like it's a voice PRI not a regular t1 data
interface serial x/x/x

Thanks

Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091119/9cce0e28/attachment.html>