[cisco-voip] VWIC2-2MFT-T1/E1 for non-voice data ?

[Brian Schultz]

controller T1 X/X/X
 channel-group 0 timeslots 1-24


That should do it for you.


Brian


On Thu, Nov 19, 2009 at 10:23 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> Can I use a VWIC2-2MFT-T1/E1 for just a point to point data T1?
>
> if so, how do I get the serial interfaces setup?  I can add card type, but
> then I get a controller T1 like it's a voice PRI not a regular t1 data
> interface serial x/x/x
>
> Thanks
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091119/b455e908/attachment.html>