[cisco-voip] Getting Original Called Extension

[Ryan Ratliff]

There is a CUCM service parameter to send original called party  
information on Unity transfers.  I'm not sure if it is in 4.2 or  
not.   You can also look at the redirecting party information in the  
CallInfo to see what value is there.

-Ryan

On Oct 2, 2009, at 12:29 PM, Jim Reed wrote:

Yes, it's me again!

Here's the scenario:
Caller calls my extension (12301) directly, gets transferred there or  
dials my DID
I don't answer and it goes to my voicemail account in Unity --  
Extension 12301
My recording says that if you want to be transferred to my cell phone  
press 1 or stay on the line to leave a message.
Caller presses 1
Option 1 under Caller Input is set for Alternate Contact Number
That Alternate Contact Number is 14017 -- the Route Point for a script
Called Number and Original Called Number for Get Call Contact Info  
both show 14017 in the script
Is there anyway to let the script know that the original extension the  
caller was trying to get to was 12301?

Unity is 5.x
IPCC is 4.0(4)
Call Manager is 4.2

I'll continue to hammer on the script and the various options but if  
I'm beating a dead horse here, someone please let me know and I'll stop.

Thank You...
-- 
Jim Reed
Technology Wrangler
Swift Communications, Inc.
970-683-5646 (Direct)
775-772-7666 (Cell)

Quando omni flunkus moritati
"When all else fails, play dead"
         Red Green - President: Possum Lodge
         (Thanks for this one, Bill W.)

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip