[cisco-voip] UCCx server JTAPI Upgrade tool doesn't run

[Tanner Ezell]

You can do that, also the JTAPI Resync should do it as well.

On Mon, Oct 5, 2009 at 12:28 PM, Jeff Ruttman <ruttmanj at carewisc.org> wrote:

>  Greetings,
>
> According to this document:
>  Document ID: 45381  here:
>
> http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00801c8316.shtml I
> run the update tool to install a new JTAPI version on my UCCx server running
> version 5.0.
>
> But when I run the tool, no application opens.  What now?
>
> I don't suppose I can download the CiscoJTAPIClient.exe out of Call Manager
> Plugins and just run that on the UCCx server, can I?
>
> Thanks
> jeff
>
> CONFIDENTIALITY NOTICE: The information contained in this email including
> attachments is intended for the specific delivery to and use by the
> individual(s) to whom it is addressed, and includes information which should
> be considered as private and confidential. Any review, retransmission,
> dissemination, or taking of any action in reliance upon this information by
> anyone other than the intended recipient is prohibited. If you have received
> this message in error, please reply to the sender immediately and delete the
> original message and any copy of it from your computer system. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Regards,
Tanner Ezell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091005/3cca0a2e/attachment.html>