[cisco-voip] Dual Sip-ua sip-server / session targets

[Aman Chugh]

Why not create dial-peers with preference command with differrent session
target servers.

HTH

Aman

On Fri, Oct 9, 2009 at 11:49 PM, Gary H <ciscovoiper at gmail.com> wrote:

> Is there a command statement for doing Dual Sip-server or Session Target
> servers?
>
> (warning invalid syntax follows /example only):
>
> sip-server ipv4:192.168.1.1
> sip-server ipv4:192.168.1.2 secondary
>
>
> dial-peer voice 3 voip
>  destination-pattern ....
>  session protocol sipv2
>  session target sip-server
>  incoming called-number .
>  dtmf-relay rtp-nte
>  codec g711ulaw
>  no vad
>
> or this
>
> dial-peer voice 3 voip
>  destination-pattern ....
>  session protocol sipv2
>  session target ipv4:192.168.1.1
>  session target ipv4:192.168.1.2 secondary
>  incoming called-number .
>  dtmf-relay rtp-nte
>  codec g711ulaw
>  no vad
>
> Gary H
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091010/c03001b4/attachment.html>