[cisco-voip] fast busy on UCCX trigger

Sechaba Mokoena sechabam at gmail.com
Tue Oct 20 10:38:58 EDT 2009


Hi Tanner,

I went through your list and confirmed that everything is configured as it
should be, but I'm still having a problem. Do you perhaps have any other
suggestions of things to look out for?

Kind regards,

Sechaba Mokoena

On Tue, Oct 20, 2009 at 3:30 PM, Tanner Ezell <tanner.ezell at gmail.com>wrote:

> Did you find a solution?
>
>
> On Tue, Oct 20, 2009 at 9:08 AM, Sechaba Mokoena <
> Sechaba.Mokoena at bytes.co.za> wrote:
>
>>  Thank you
>>
>>
>>
>> *Sechaba Mokoena*
>>
>> Systems Engineer
>>
>> Bytes Technology Group - Systems Integration
>>
>>
>> Tel : (+27) (11) 205-7000 |  Fax: (+27) (11) 205-7584  |  Cell : (+27) 84
>> 798-6803 | msn:sechabam at live.co.za
>> Web  :* **www.btgroup.co.za*  |  Press Office :
>> www.itweb.co.za/office/bytes   |   Licensing :* *www.purelicensing.co.za
>>
>>
>>
>> Bytes Systems Integration (Pty) Ltd : Registration No: 1995/012031/07
>> A subsidiary of Bytes Technology Group SA (Pty) Ltd,   In association with
>> KAGISO
>> P O Box 5905, Halfway House, 1685, Midrand;  Bytes Business Park, Block B,
>> 241 Third Road, Halfway Gardens, Midrand, South Africa
>>
>> E-Mail Disclaimer: http://www.altron.co.za/email.asp or phone: (+27) (11)
>> 205-7000
>>
>>
>>
>> P please don't print this e-mail unless you really need to
>>
>>
>>
>> *From:* Tanner Ezell [mailto:tanner.ezell at gmail.com]
>> *Sent:* Monday, October 19, 2009 4:39 PM
>> *To:* Sechaba Mokoena
>> *Cc:* cisco-voip at puck.nether.net
>> *Subject:* Re: [cisco-voip] fast busy on UCCX trigger
>>
>>
>>
>> Verify:
>>
>>
>>
>> 1. You do not have any dialing restrictions from use of Partitions and
>> CSSs (use DNA to verify)
>>
>> 2. The DN exists in Unified CM
>>
>> 3. The CTI Ports exist and are registered to UCCX in Unified CM
>>
>> 4. The UCCX box is "IN_SERVICE"
>>
>>
>>
>> Tanner Ezell
>>
>> On Mon, Oct 19, 2009 at 10:31 AM, Sechaba Mokoena <sechabam at gmail.com>
>> wrote:
>>
>> Hi,
>>
>> I've setup an application in UCCX, but I'm constantly receiving a fast
>> busy when I dial the trigger. I've gone though my script, the application,
>> and prompts, but I can't detect a problem. I've checked CoS on CTI ports and
>> the CTI route point, but everything looks fine. Does anyone have a
>> suggestion as to where I can focus my search to correct this problem.
>>
>> Kind regards,
>>
>> Sechaba Mokoena
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
>>
>> --
>> Regards,
>> Tanner Ezell
>>
>>
>> The information contained in this message and or attachments is intended
>> only for the person or entity to which it is addressed and may contain
>> confidential and/or privileged material.  Any review, retransmission,
>> dissemination or other use of, or taking of any action in reliance upon,
>> this information by persons or entities other than the intended recipient is
>> prohibited. If you received this in error, please contact the sender and
>> delete the material from any system and destroy any copies.
>>
>
>
>
> --
> Regards,
> Tanner Ezell
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091020/ee9b1210/attachment.html>


More information about the cisco-voip mailing list