[cisco-voip] Software Feature License: Upgrade 6.1(2) to 6.1(4)

[Scott Voll]

just upgraded from 6.1.2 to 6.1.4a with no additional Software license

mine shows a 6.1 feature license.

so long as yours does also..... you should be fine.

have fun

Scott

On Wed, Oct 28, 2009 at 10:03 AM, Dave Wolgast <dwolgas1 at rochester.rr.com>wrote:

> While reviewing the release notes for 6.1(4a), I found the following under
> Documentation Changes:
>
> Software Feature License
>
> When you upgrade from any supported release of Cisco Unified Communications
> Manager to Release 6.1(3x), you must download and install a software feature
> license to activate the new features. The *Cisco Unified Communication
> Administration Guide* indicates that you must install a software feature
> license only if you are upgrading from 5.x or 6.x releases. You also need a
> license if you are upgrading from supported 4.x releases. For instructions
> about how to obtain and install a software feature license, see the "License
> File Upload" chapter in the *Cisco Unified Communications Manager
> Administration Guide*.
> The 6.1(1) CUCM admin guide says:
>
> *Note *You do not need to obtain new licenses if you are upgrading within
> a software release train, such as Cisco Unified Communications Manager
> 6.0(1) to 6.1(1).
>
> I am confused.  My license report says that I have a valid 6.1 software
> license installed.
>
> Does the above mean that I have to add an additional feature license to go
> from 6.1(2)SU1 to 6.1(4a)?  If so, it isn't clear how I do this, since the
> CUCM Admin Guide covers version 6.1(1).  I don't have a new PAK as I'm using
> the UCSInstall file rather than media obtained through the PUT tool.
>
> Thanks for helping me clear this up.
>
> --
> Dave Wolgast
> Livonia, NY
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091028/1d72b9b9/attachment.html>