[cisco-voip] Upgrade CUCMBE - Reboot/Switch Version order

[Carter, Bill]

I sure there are software version compatibility requirements between UCM
and UC. I can't find the matrix. 

 

From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Thursday, October 29, 2009 9:59 AM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Upgrade CUCMBE - Reboot/Switch Version order

 

I was under the impression that UC upgrades are tied to CUCM upgrades.
I know I've seen fixes for both in CUCM ES readme files.

 

-Ryan

 

On Oct 29, 2009, at 10:42 AM, Carter, Bill wrote:





I am preparing for a CUCMBE upgrade. I am going from UCM 6.1(2) and
Connection 2.1. Reading the documentation I perform separate software
upgrades for UCM and UC.

 

Should I perform the UCM upgrade and reboot to the new partition, then
perform the UC upgrade and switch to the new partition?

 

Can I perform both upgrades, then reboot?

 

Do I reboot/switch version in UCM, then when the server is up,
reboot/switch version for UC?

 

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091029/636045c5/attachment.html>