[cisco-voip] Call counters high on intercluster trunk

[Nate VanMaren]

We have two UCM Clusters that are currently at 7.1.2.  The main one has most of the phones and the other has about 80 phones.  There are route patterns to the individual extensions that are on the 2nd cluster because the extensions overlap.  There is also a 2XXXX route pattern and PSTN access route patterns on the 2nd cluster that point to the main cluster.

The strange behavior is the longer the clusters are up the higher and higher the active call counters go.  After a few weeks we get about 2000 active calls both clusters, and if we reboot a node on either cluster the calls in-between clear on both sides.

I cannot find any loops in the routing, the CSSs of the ICT on the 2nd server don't allow access back to the main cluster.

Anyone have some ideas?

Thanks
-Nate


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090909/e0017eb5/attachment.html>