[cisco-voip] Unity Connection Config

[STEVEN CASPER]

As I move closer to our migration from Unity to Connections I find a couple of nagging questions left over I have been unable to resolve:
 
1. In Unity I could use Message Monitor to delete new messages after 30 days. This does not seem to be an option for message management with Connection.
 
2. Some test users have complained that the inter digit timeout value is too short when entering IDs and pins. Has any one found a setting to increase?
 
Thanks
Steve
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090922/731c7a35/attachment.html>