[cisco-voip] Need Help Configuring a VG204 Gateway on a CME VoIPEnvironment

[Kim, Hyoun S]

I actually ended up working it out.  I didn’t define the ephone entries on the CME.  I feel dumb…

 

Hyoun Kim

Network Administrator I

Charter Media - East Division

 

Email: Hyoun.Kim at chartercom.com

Office: 615.217.6245

Fax: 615.217.6255

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kim, Hyoun S
Sent: Thursday, September 24, 2009 3:54 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Need Help Configuring a VG204 Gateway on a CME VoIPEnvironment

 

Hello all,

 

I’ve followed the configuration guide on Cisco’s website (http://www.cisco.com/en/US/partner/docs/routers/access/vg202_vg204/software/vg2_vg4_scg.html).  I’ve even read the manuals for the CME and Supplementary Service Features for FXS Ports on Cisco Voice Gateways.  However, I’m stumped…

 

I set up the Voice Gateway as far as I can and connected it directly to our network on the same subnet as the CME.  I hooked up a regular analog phone to it, but I get a busy signal.  I’m supposed to set the VG204 for our fax machines, but right now I just want to get the gateway configured so that I can at least make voice calls.

 

Attached is the configuration on the VG204.  I’ve assigned an IP to the FastEthernet interface.  I’ve setup all the SCCP settings the configuration guide mentioned.  I know I’m missing something small.

 

Any help/suggestions?  My CME is running version 7.0.

 

 

________________________________

Hyoun Kim • Network Administrator I – East Division

640 Broadmor Blvd • Suite 80 • Murfreesboro, TN 37129

' 615.217.6245 • ' 859.312.6941 • 7 615.217.6255 • * Hyoun.Kim at chartercom.com

 


E-MAIL CONFIDENTIALITY NOTICE: 

 

 

 

The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090924/10eff353/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1990 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090924/10eff353/attachment.jpe>