[cisco-voip] CallManager Express 7.1 and G.722 (service phone g722CodecSupport 2)

[Ed Leatherman]

Maybe I'm just fooling myself, but I can still tell a difference in
the audio between calls running at G711 vs G722 even with the standard
handsets.

All the wide handsets I have all have some numbers in black ink
printed on the bottom edge of the microphone end (under the recessed
cord connection like nate said)

On Wed, Mar 31, 2010 at 5:42 PM, Jason Aarons (US)
<jason.aarons at us.didata.com> wrote:
> Looking at the receiver on the 7961 phone, how would one tell if it's a Wideband receiver....I notice my receiver's have no markings...only ?? twice shows G.722
>
> -----Original Message-----
> From: Brandon Bennett [mailto:bennetb at gmail.com]
> Sent: Wednesday, March 31, 2010 4:26 PM
> To: Ed Leatherman
> Cc: Jason Aarons (US); cisco-voip at puck-nether.net
> Subject: Re: [cisco-voip] CallManager Express 7.1 and G.722 (service phone g722CodecSupport 2)
>
> Yeah but if the speaker isn't picking up the additional voice range
> (4000hz to 7000hz) then it doesn't matter if G.722 is on or not.
>
>
> On Wed, Mar 31, 2010 at 8:17 AM, Ed Leatherman <ealeatherman at gmail.com> wrote:
>> This shouldn't keep the phone from using G.722 - the phone doesn't
>> know what handset is plugged into it afaik. I've had plain jane 7961's
>> out of box w/o the handset still connect at 722. (granted this is on
>> CM and not CME)
>>
>> On Tue, Mar 30, 2010 at 9:19 PM, Brandon Bennett <bennetb at gmail.com> wrote:
>>> Jason,
>>>
>>> I belive the 7941 itself supports the codec, but the handset and
>>> speaker phone do not.  Cisco does state that you can swap the handset
>>> for a wideband handset and gain the full G.722 support.
>>>
>>> Brandon
>>>
>>> On Tue, Mar 30, 2010 at 5:11 PM, Jason Aarons (US)
>>> <jason.aarons at us.didata.com> wrote:
>>>> Oddly all calls to the Receptionist 7961/7914 are G.711. I can't figure out
>>>> why.  I make calls phone-to-phone or phone-to-pstn I get G.722.
>>>>
>>>>
>>>>
>>>> Everything else (except Unity Express) the calls are G.722. Using all 7961s
>>>> with 8.4.2S.
>>>>
>>>>
>>>>
>>>> Does 7914 disable G.722?  Will see about Wireshark or trace tomorrow.  Any
>>>> idea what I can debug on CME to see why G.711 is being selected for calls to
>>>> her ? -jason
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> SLTVWRTA01#show run | begin telephony-service
>>>>
>>>> telephony-service
>>>>
>>>>  no auto-reg-ephone
>>>>
>>>>  authentication credential didata123 didata123
>>>>
>>>>  xml user didata123 password didata123 15
>>>>
>>>>  codec g722-64
>>>>
>>>>  max-ephones 150
>>>>
>>>>  max-dn 200
>>>>
>>>>  ip source-address 10.14.129.1 port 2000
>>>>
>>>>  service phone g722CodecSupport 2
>>>>
>>>>  url services http://10.14.129.2/voiceview/common/login.do
>>>>
>>>>  url authentication http://10.14.129.1/CCMCIP/authenticate.asp
>>>>
>>>>  load 7914 S00105000300.SBN
>>>>
>>>>  load 7941 SCCP41.8-4-2S.LOADS
>>>>
>>>>  load 7941GE SCCP41.8-4-2S.LOADS
>>>>
>>>>  load 7945 SCCP45.8-4-2S.LOADS
>>>>
>>>>  load 7961 SCCP41.8-4-2S.loads
>>>>
>>>> voicemail 4199
>>>>
>>>>  max-conferences 40 gain -6
>>>>
>>>>  call-forward pattern .T
>>>>
>>>>  moh music-on-hold.au
>>>>
>>>>  multicast moh 239.1.1.1 port 2000
>>>>
>>>>  web admin system name cisco secret 5 $1$bpj1$WkwzUq8KXSqK1cdyUPCJD/
>>>>
>>>>  dn-webedit
>>>>
>>>>  time-webedit
>>>>
>>>>  transfer-system full-consult
>>>>
>>>>  secondary-dialtone 9
>>>>
>>>>  login timeout 60
>>>>
>>>>  create cnf-files version-stamp 7960 Mar 30 2010 18:51:10
>>>>
>>>> ________________________________
>>>>
>>>> Disclaimer: This e-mail communication and any attachments may contain
>>>> confidential and privileged information and is for use by the designated
>>>> addressee(s) named above only. If you are not the intended addressee, you
>>>> are hereby notified that you have received this communication in error and
>>>> that any use or reproduction of this email or its contents is strictly
>>>> prohibited and may be unlawful. If you have received this communication in
>>>> error, please notify us immediately by replying to this message and deleting
>>>> it from your computer. Thank you.
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>>
>>
>> --
>> Ed Leatherman
>>
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
>



-- 
Ed Leatherman