[cisco-voip] SG3 Faxing and IOS v15.1 (new thread)

[Mike King]

Keep us posted,

I have a 2921 and and VG202 (MGCP), and we're having issues with faxes as
well.

Mike

On Fri, Apr 9, 2010 at 4:30 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Thanks for this Nick. Documentation errors cause a bit of an issue, since
> that's where the TAC looks for support entitlement. This occurs mainly in
> the non-U.S. based support centres where if it is not on the data sheet,
> they're not helping. I usually get things escalated back into the U.S. and
> the TAC engineers are more "investigative" and help figuring things out.
>
> I like the idea of SCCP since it simplifies configuration, procedures, etc.
> But if I need a separate stack of MGCP based VG224s for faxing, I can do
> that too. Not a big deal. Not sure how SRST would work in a case like that,
> guess I would need to create dial-peers for inbound and outbound calls. More
> reason for SCCP.
>
> I guess I can just try configuring things on my spare VG224 and router and
> see how things go. Call up the TAC if I have problems and see what they say.
>
> Thanks again, Lelio
>
>
>
>
> -
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100410/2cb7a561/attachment.html>