[cisco-voip] Resetting Cisco ATA 186

[Kim Hays (MIS)]

I'm trying to reset a Cisco ATA 186 back to the factory default with the
following prompts but unable to get device to reset. Any ideas? Thanks!

 

Resetting the Cisco ATA to Factory Default Values 

It is possible that you may, under some circumstances, want to reset the
Cisco ATA to its factory default values. For example, this is the only
way to recover a forgotten password without contacting your Cisco
representative. 

To perform a factory reset, you must use the voice configuration menu
and follow these steps: 

Procedure 

________________________________

Step 1  Press the function button on the Cisco ATA. 

Step 2 Press the digits 322873738 (FACTRESET) then press # on your
telephone keypad. 

Step 3 Press 3 on your telephone keypad to confirm that you want to
reset the Cisco ATA, then hang up the phone

 

 

Kim Hays

Telecommunications Specialist

Rockdale County MIS

770-278-7078

770-278-7070 or helpdesk at rockdalecounty.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100419/42bd7c61/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 167 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100419/42bd7c61/attachment.png>