[cisco-voip] Toshiba eStudio 351c (no FAX speed setting) - is turning ECM off enough for SG3 to G3?

[Lelio Fulgenzi]

This has to do with my previous post about moving a remote site from Cisco relay to pass-through. 

They are currently using VG248s with 3725 PRI (MGCP). We are moving them over to VG248s and 6608s + 3845 PRI (all MGCP). 

Here's a link to my original message which has some details. 

http://cisco-voip.markmail.org/search/?q=#query:%20from%3A%22Lelio%20Fulgenzi%22+page:1+mid:pa7b5wltlxzkvohb+state:results 

But I'm guessing this line on the 3725 is doing what you are saying? 


mgcp fax rate 14400 

And possibly the VG248 config setting: Fax relay maximum speed (default: 14400 bps) 

But it seems both those commands are for relay only. 

How do I do this for passthrough? 












--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Matthew Ballard" <mballard at otis.edu> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Tuesday, April 20, 2010 3:56:19 PM GMT -05:00 US/Canada Eastern 
Subject: RE: [cisco-voip] Toshiba eStudio 351c (no FAX speed setting) - is turning ECM off enough for SG3 to G3? 




What are you using to connect the fax to the IP network? VGs and gateways with FXS ports have a command that can downspeed a fax. 



Matthew 







From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Tuesday, April 20, 2010 11:32 AM 
To: cisco-voip voyp list 
Subject: [cisco-voip] Toshiba eStudio 351c (no FAX speed setting) - is turning ECM off enough for SG3 to G3? 




It doesn't look like the Toshiba eStudio 351c has a FAX transmission setting that I can find. There is an ECM setting. 

Is turning off ECM enough to turn off SG3? 

Has anyone out there figured out how to downspeed a Toshiba eStudio 351c? 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100420/9459e018/attachment.html>