[cisco-voip] Connecting a CME to Analog Lines

Wed Apr 21 18:16:48 EDT 2010

Brilliant.  I have several of those ready.  Specifically the VIC2-4FXO cards.

Now, I'm curious....   With this setup...  Would I create a hunt group on the router to bundle these lines together for outbound calling?  I've only dealt with PRI lines and not analog lines.

So I would create a trunk group "POTS".  Then apply this trunk group to each voice-port and also include the connection plar command.  Then on the dial-peers, I would include the trunk group there as well?

Thanks for the response.

Hyoun Kim
Network Administrator
Charter Media - East Division
640 Broadmor Blvd, Suite 80
Murfreesboro, TN 37129

Email: Hyoun.Kim at chartercom.com<mailto:Hyoun.Kim at chartercom.com>
Office: 615.217.6245
Fax: 615.217.6247

From: Cristobal Priego [mailto:cristobalpriego at gmail.com]
Sent: Wednesday, April 21, 2010 4:52 PM
To: Kim, Hyoun S
Subject: Re: [cisco-voip] Connecting a CME to Analog Lines

if you want to connect the POTS lines to the CME you need an FXO card
2010/4/21 Kim, Hyoun S <Hyoun.Kim at chartercom.com<mailto:Hyoun.Kim at chartercom.com>>
I have a small office here that utilizes regular analog lines.  There is no current analog PBX in place and the installation of the CME is for future expansion & the eventual move to a PRI.  As it stands right now, this office is buying regular lines and has a physical phone connected to each line (just as a normal house phone).

I know that in other configurations, there are hunt groups & what not, but I'm wondering what kind of interface card I need on the router.  I have a handful of 4-port FXS & FXO cards available to put in this router.

Thanks in advance.
[cid:image001.jpg at 01CAE175.16DB6260]
________________________________
Hyoun Kim * Network Administrator - East Division
640 Broadmor Blvd * Suite 80 * Murfreesboro, TN 37129
' 615.217.6245 * 7 615.217.6247 * * Hyoun.Kim at chartercom.com<mailto:Hyoun.Kim at chartercom.com>

E-MAIL CONFIDENTIALITY NOTICE:

The contents of this e-mail message and

any attachments are intended solely for the

addressee(s) and may contain confidential

and/or legally privileged information. If you

are not the intended recipient of this message

or if this message has been addressed to you

in error, please immediately alert the sender

 by reply e-mail and then delete this message

and any attachments. If you are not the

intended recipient, you are notified that

any use, dissemination, distribution, copying,

or storage of this message or any attachment

is strictly prohibited.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

E-MAIL CONFIDENTIALITY NOTICE: 

The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100421/66b6b1e2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1990 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100421/66b6b1e2/attachment.jpg>