[cisco-voip] Configure incoming CLID on isdn of a 2821

[Leetun, Rob]

Here is the Debug isdn q931

 

Apr 28 12:14:43.243: ISDN Se0/2/0:23 Q931: RX <- SETUP pd = 8  callref =
0x001B 

        Bearer Capability i = 0x8090A2 

                Standard = CCITT 

                Transfer Capability = Speech  

                Transfer Mode = Circuit 

                Transfer Rate = 64 kbit/s 

        Channel ID i = 0xA98397 

                Exclusive, Channel 23 

        Facility i =
0x9FAA068001008201008B0100A11802011C0201008210416E64726561204672616E6369
73636F 

                Protocol Profile =  Networking Extensions 

                0x0100 

                0x820100 

                0x8B0100 

                0xA11802011C0201008210416E64726561204672616E636973636F 

                Component = Invoke component 

        Calling Party Number i = 0x00A0, '4718' 

                Plan:Unknown, Type:Unknown 

        Called Party Number i = 0x80, '3579' 

                Plan:Unknown, Type:Unknown

Apr 28 12:14:43.259: ISDN Se0/2/0:23 Q931: TX -> CALL_PROC pd = 8
callref = 0x801B 

        Channel ID i = 0xA98397 

                Exclusive, Channel 23

Apr 28 12:14:43.395: ISDN Se0/2/0:23 Q931: TX -> ALERTING pd = 8
callref = 0x801B 

        Progress Ind i = 0x8188 - In-band info or appropriate now
available 

Apr 28 12:14:47.907: %ISDN-6-CONNECT: Interface Serial0/2/0:22 is now
connected to 4718 N/A

Apr 28 12:14:47.907: %ISDN-6-CONNECT: Interface Serial0/2/0:22 is now
connected to 4718 N/A

Apr 28 12:14:47.907: ISDN Se0/2/0:23 Q931: TX -> CONNECT pd = 8  callref
= 0x801B

Apr 28 12:14:47.923: ISDN Se0/2/0:23 Q931: RX <- CONNECT_ACK pd = 8
callref = 0x001B

Apr 28 12:14:56.051: ISDN Se0/2/0:23 Q931: RX <- DISCONNECT pd = 8
callref = 0x001B 

        Cause i = 0x8090 - Normal call clearing

Apr 28 12:14:56.051: %ISDN-6-DISCONNECT: Interface Serial0/2/0:22
disconnected from 4718 , call lasted 8 seconds

Apr 28 12:14:56.055: ISDN Se0/2/0:23 Q931: TX -> RELEASE pd = 8  callref
= 0x801B

Apr 28 12:14:56.067: ISDN Se0/2/0:23 Q931: RX <- RELEASE_COMP pd = 8
callref = 0x001B

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Leetun, Rob
Sent: Wednesday, April 28, 2010 11:41 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Configure incoming CLID on isdn of a 2821

 

Hi,

 

I cannot get incoming CLID to be presented on the phone.  We have a 2821
with isdn.  Does anyone know of a command I can use to get this to work?

 

Thanks!

 

 

Rob

 

Robert Leetun

Network Engineer

Boulder County Information Technology

2025 14th Street

Boulder, CO 80302

303 441-3866 (W)

303 441-3983 (F)

rleetun at bouldercounty.org <mailto:arees at bouldercounty.org> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100428/c73fe25f/attachment.html>