[cisco-voip] 9971 phone isssues

[Jobe Gates]

I'm on a supported IOS.  SRST 7.1 supports it.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/da
ta_sheet_c78-520521.html

 

 

12.4(24)T is the minimum for SRST.

 

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Tuesday, August 03, 2010 8:16 PM
To: 'cisco-voip mailinglist'
Subject: Re: [cisco-voip] 9971 phone isssues

 

Show telephony-service and look at the version number

 

Are you sure you running a SRST/CME version that supports 9971? But a good
idea is to turn on CME and manually setup the 9971 to verify it works then
flip back to SRST.  Might be missing the type c

 

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/da
ta_sheet_c78-570481.html

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jobe Gates
Sent: Tuesday, August 03, 2010 4:15 PM
Cc: 'cisco-voip mailinglist'
Subject: Re: [cisco-voip] 9971 phone isssues

 

I'm having the same problem with a 9951.  I opened a TAC case and they are
saying since it's  a SIP phone it needs to register like a CME phone.

 

It's still open so I'm still working on it.  Let me know I you get this to
go.

 

Thanks,

Jobe 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ciscozest
Sent: Wednesday, April 28, 2010 2:09 AM
To: cisco-voip mailinglist
Subject: [cisco-voip] 9971 phone isssues

 

I have just implemented Cisco 9971 phones and realized few problems.

1. The phone could not get the SRST information from CallManager thus this
phone could not registered during SRST. I checked on the phone information
displayed and the standby server option is blank. The other phone models
(older) work fine.

2. The custom softkey template applied for 9971 phone does not work. Tested
with other phone models, they are all good.

 

i have tried to reset TFTP service, reset the phone until rebooting the CUCM
server but no luck with the above problems.

I am using CUCM 7.1.3b SU2. The 9971 firmware is SIP 9.0.2 (latest). The
gateway is cisco2921 IOS c2900-universalk9-mz.SPA.150-1.M2.bin. Has anyone
experienced this issue before? Appreciate for any feedbacks.

 

Thanks,

Denny

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

 

  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100803/e2343ac9/attachment.html>