[cisco-voip] Help with FXS

[Wes Sisk]

Supplementary services (conference, transfer) will depend on what is 
controlling the FXS port.  What are you using for call control?

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsfeatmd.html

/Wes


On Monday, August 09, 2010 3:09:43 PM, Mark Rudholm <mark at rudholm.com> 
wrote:
> I have two VIC-2FXS cards in a 1760 that are working fine,
> however, I haven't been able to figure out how to enable
> a secondary dial tone on them, as in, you're on a call and
> flash the hookswitch to access a secondary dial tone in order
> to transfer, conference, or consult someone else.  Any pointers
> or pointers to relevant docs would be appreciated.
>
> I'm also trying to figure out how to configure these FXS lines
> for distinctive ring (based on the calling number or perhaps
> the SIP "Alert-Info:" header for calls that arrive at the router
> via SIP).
>
> -Mark
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip