[cisco-voip] Abbreviated dialing in CME

[Tim Smith]

Hi,

Just use dial peers for each speed dial.
You can use CoR if you need to restrict access.

Cheers,

Tim

On Wed, Aug 4, 2010 at 10:54 PM, Jawad A Hai <ahjawad at hotmail.com> wrote:
> Hi
> We are in process of replacing a Panasonic with CME 3925.
> We are facing a small issue with abbreviated dialing. In Panasonic they use
> these abbr dialing like **123 for mobile number or **124 for national pre
> defined numbers.
> With this feature any user who without Mobile or National access can reach
> certain numbers. I looked into CME to achieve this with abbreviated dialing.
> But the drawback is
> it will work only if the user has Mobile or National access.
> Is there a work around.
> One option is to translate the call, but there are limitations I can do only
> 16 translation.
> The client has around 50 abbreviated numbers.
> Any suggestion plz
>
> Thank you
>
> AAli
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>