[cisco-voip] vg224 port problem

Ed Leatherman ealeatherman at gmail.com
Fri Aug 27 09:54:09 EDT 2010


Just ran across this today:

PSC-AVGW-9#sh stc dev sum
....
2/21       AN0C863BE468415 IS       IDLE           ALG     41006      CCM
2/22       AN0C863BE468416 OOS      UNREGISTERED   ALG     Not Avail  UNKN
2/23       AN0C863BE468417 IS       IDLE           ALG     41036      CCM
...

Anyone know if 2/22 is indicative of a bad port, or is there some
other reason it would go OOS? It's at a regional campus, so i'm still
waiting on someone at the site to eyeball it and check cross-connects
etc.

On Thu, Aug 26, 2010 at 10:49 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> i have had ports go bad. on more than one. make sure you have a spare RJ21
> cable you can use to isolate the problem to the gateway and eliminate bad
> pairs and cross connects. causes can be anything from faulty wiring to
> lightning strikes. make sure you have good lightning arestors on all your
> pairs.
>
> i typically wait until two or three ports go bad before returning it though.
> it's not that uncommon.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Robert Shearrill" <rshearri at uchicago.edu>
> To: cisco-voip at puck.nether.net
> Sent: Thursday, August 26, 2010 10:10:16 AM
> Subject: [cisco-voip] vg224 port problem
>
> Have anyone ever had a vg224 analog gateway port go bad. I have only battery
> at the port No dial tone.. (Only on one port, the others appear to be
> fine).  We have tried reseting port in Call Manager, shut and no shut on the
> voice port in the analog gateway, reloading the analog gateway, and power
> cycling the analog gateway. And none of these worked in restoring dial tone.
>
> Could this be just a bad port on the vg224.
>
> Has anyone experienced this. Is there other test that can be done in
> troubleshooting this issue.
>
> Thanks
>
> Robert
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Ed Leatherman



More information about the cisco-voip mailing list