[cisco-voip] vg224 port problem

[John.VanLaecke at ghd.com]

have you got the service for mgcp or skinny assigned to the port ?


Regards,

John Van Laecke 
Network Administrator 

GHD   Accomplish More Together
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E: John.vanlaecke at ghd.com
Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au
Water | Energy & Resources | Environment | Property & Buildings | 
Transportation

Please consider the environment before printing this email 



From:
Ed Leatherman <ealeatherman at gmail.com>
To:
Lelio Fulgenzi <lelio at uoguelph.ca>
Cc:
cisco-voip at puck.nether.net
Date:
27/08/2010 11:54 PM
Subject:
Re: [cisco-voip] vg224 port problem
Sent by:
cisco-voip-bounces at puck.nether.net



Just ran across this today:

PSC-AVGW-9#sh stc dev sum
....
2/21       AN0C863BE468415 IS       IDLE           ALG     41006      CCM
2/22       AN0C863BE468416 OOS      UNREGISTERED   ALG     Not Avail  UNKN
2/23       AN0C863BE468417 IS       IDLE           ALG     41036      CCM
...

Anyone know if 2/22 is indicative of a bad port, or is there some
other reason it would go OOS? It's at a regional campus, so i'm still
waiting on someone at the site to eyeball it and check cross-connects
etc.

On Thu, Aug 26, 2010 at 10:49 AM, Lelio Fulgenzi <lelio at uoguelph.ca> 
wrote:
> i have had ports go bad. on more than one. make sure you have a spare 
RJ21
> cable you can use to isolate the problem to the gateway and eliminate 
bad
> pairs and cross connects. causes can be anything from faulty wiring to
> lightning strikes. make sure you have good lightning arestors on all 
your
> pairs.
>
> i typically wait until two or three ports go bad before returning it 
though.
> it's not that uncommon.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Robert Shearrill" <rshearri at uchicago.edu>
> To: cisco-voip at puck.nether.net
> Sent: Thursday, August 26, 2010 10:10:16 AM
> Subject: [cisco-voip] vg224 port problem
>
> Have anyone ever had a vg224 analog gateway port go bad. I have only 
battery
> at the port No dial tone.. (Only on one port, the others appear to be
> fine).  We have tried reseting port in Call Manager, shut and no shut on 
the
> voice port in the analog gateway, reloading the analog gateway, and 
power
> cycling the analog gateway. And none of these worked in restoring dial 
tone.
>
> Could this be just a bad port on the vg224.
>
> Has anyone experienced this. Is there other test that can be done in
> troubleshooting this issue.
>
> Thanks
>
> Robert
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Ed Leatherman

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_____________________ 
This e-mail has been scanned for viruses by MessageLabs.



_____________________ 
This email and all attachments are confidential. For further important information about emails sent to or from GHD or if you have received this email in error, please refer to http://www.ghd.com/emaildisclaimer.html .
_____________________ 
This e-mail has been scanned for viruses by MessageLabs.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100831/be9ca446/attachment.html>