[cisco-voip] SIP trunk need to be reset in order to work upon system startup ?

[Ki Wi]

Is this normal?

I have a non production site which keep experiencing power failure. After
someone boots up the server, the users can call out but people from PSTN
can't call in . It works after manually resetting the SIP trunk at
callmanager end.


The setup as below

 Cisco 2911 (Not sure, should be 15.0M3 or something similar) <----SIP----->
CUCM 8.0.3SU1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101214/e7031fe0/attachment.html>