[cisco-voip] Cisco Unity Connection Domain Name Change

[Anthony Holloway]

The CLI guide for 7.1(2), which is what you are supposed to use for 7.1(x)
versions, states:

Snippet:
If you continue, this command causes a temporary loss of network
connectivity.

Source:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/cli_ref/7_1_2/cli_ref_712.html#wp40005

I can tell you from experience, and not specifically which version, but I
said "no" to continuing when I read the warning the system gives you, and it
still bounced the network interface.

Anthony

On Sat, Dec 18, 2010 at 12:15 PM, Mike King <me at mpking.com> wrote:

> I have unity Connection 7.1.3
>
> I need to change the domain name of the box.  (NOT THE HOSTNAME)
>
> I can't find any documentation on this for 7.1.3
>
> According to
>
> http://www.ciscopark.org/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrug070.pdf
>
> to change it in 8.x it's just doing the following:
> To Change the Domain Name of the Connection Server When DHCP Is Not
> Configured
> On the Connection server, run the set network domain CLI command.
>
> No reboot needed.
>
> Is this the same on Unity Connection 7.1.3?
>
> Thanks
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101218/88d4dfcd/attachment.html>