[cisco-voip] AIM-CUE Failed but Problem with Contract not replacing it

[Anthony Kouloglou]

  Hi all,
i have a 2801 covered by SNT nbd (and all the modules included in it).
So, a few years ago when the conrtact was created, i was not able to add 
the serial numbers of the vic2-4fxs, E1/T1-MFT, and an AIM-CUE.
There was always an error on cisco's SCC.
But, when the vic2-4fxs failed, i had no problem in the RMA: i just 
issued the SN if the 2801 who was covered by the contract, and i got a 
replacement with no problem.
But, yesterday, when i opened the TAC for the AIM that Failed, when 
finally the engineer created the RMA, i got a message from the logistics 
department that the serial number of the AIM is not listed anywhere, 
therefore, they are not going to replace it!!
Even now, i am trying to add its serial number to the SCC under the 2801 
but it is not possible!!
Please, advise if anyone has something like that before.

Kind Regards
Anthony
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101224/61af3509/attachment.html>