[cisco-voip] how to Change date / time in cisco IP Phone 7961
Cristobal Priego
cristobalpriego at gmail.com
Tue Feb 2 11:34:20 EST 2010
Also make sure that you specify the phone type under ephone config mode
Sent from my iPhone
On Feb 2, 2010, at 7:50 AM, "Jason Aarons (US)" <jason.aarons at us.didata.com
> wrote:
> Based upon below all looks correct, try a “telephony-service, resta
> rt all” which resets the phones or a reload after hours. If still a
> issue I suggest try changing 7961 load or opening a TAC case for tr
> oubleshooting.
>
>
>
> What time are the phones showing compared to current time? Is it off
> 1 hour? Or showing GMT? Perhaps wrong timezone under “telephony-ser
> vice, timezone x”.
>
>
>
> From: Arnold Lesar [mailto:arnoldlesar at yahoo.co.uk]
> Sent: Tuesday, February 02, 2010 12:38 AM
> To: Jason Aarons (US)
> Cc: VoIPgroup
> Subject: Re: [cisco-voip] how to Change date / time in cisco IP
> Phone 7961
>
>
>
> Dear Jason,
>
> I've been configured my router and it sync with all switch and
> router, but the time in IP phone 7961 still not change.
>
> is it another way to solved this? why the my 7961 still not change?
>
> VG-3825#sh ntp stat
> Clock is synchronized, stratum 5, reference is 127.127.7.1
> nominal freq is 250.0000 Hz, actual freq is 249.9878 Hz, precision
> is 2**24
> reference time is CF121CC0.23F535E9 (10:38:40.140 JAVT Tue Feb 2 2010)
> clock offset is 0.0000 msec, root delay is 0.00 msec
> root dispersion is 0.02 msec, peer dispersion is 0.02 msec
>
> VG-3825#sh ntp ass
> address ref clock st when poll reach delay
> offset disp
> *~127.127.7.1 127.127.7.1 4 6 64 377 0.0
> 0.00 0.0
> * master (synced), # master (unsynced), + selected, - candidate, ~
> configured
>
> this is the switch connect to the ip phone
>
> C3560-PoE#sh ntp status
> Clock is synchronized, stratum 7, reference is 172.31.0.1
> nominal freq is 119.2092 Hz, actual freq is 119.2059 Hz, precision
> is 2**18
> reference time is CF1238AF.48AE7B5F (12:37:51.283 JAVT Tue Feb 2 2010)
> clock offset is -70.9155 msec, root delay is 6.13 msec
> root dispersion is 158.39 msec, peer dispersion is 1.39 msec
>
> C3560-PoE#sh ntp ass
> address ref clock st when poll reach delay
> offset disp
> *~xxx.xx.x.x xxx.xx.xx.x 6 37 64 377 2.2
> -70.92 1.4
> ~xxx.xx.xx.x 127.127.7.1 5 3280 64 0 0.8 0.22 16000
> .
> * master (synced), # master (unsynced), + selected, - candidate, ~
> configured
>
> Topology :
>
> Router - Core Switch - Switch - IP Phone
>
> Router : NTP Master
> Core Switch : NTP Server
> Switch : NTP Peer
>
> GBU
>
> Regards,
>
>
>
> Arnold Samuel Lesar
>
>
>
> ------------------------------------------------------
> Note: This message was created by ARNOLD SAMUEL LESAR.
> ------------------------------------------------------
>
>
>
> ---
> ---
> --------------------------------------------------------------------
> ---
> ---
> --------------------------------------------------------------------
> PT. PELITA RELIANCE INTERNATIONAL
> Eka Hospital BSD City, Tangerang
> Address : CBD Lot IX, BSD City, Tangerang
> Phone : (+62-21) 256 555 55
> Fax : (+62-21) 256 555 44
> ---
> ---
> --------------------------------------------------------------------
> ---
> ---
> --------------------------------------------------------------------
>
>
>
>
>
> From: Jason Aarons (US) <jason.aarons at us.didata.com>
> To: Jonathan Charles <jonvoip at gmail.com>; Arnold Lesar <arnoldlesar at yahoo.co.uk
> >
> Cc: cisco-voip at puck.nether.net
> Sent: Tue, 2 February, 2010 6:42:24
> Subject: RE: [cisco-voip] how to Change date / time in cisco IP
> Phone 7961
>
>
>
> Use “ntp master” on the router to server up NTP, then reset your
> phones. 7961 use NTP, 7960 use clock, under telephony-server set yo
> ur timezone too -jason
>
>
>
> Show ntp status
>
> Show ntp association
>
>
>
> SDCVWRT-5204-2#show ntp status
>
> Clock is synchronized, stratum 8, reference is 127.127.1.1
>
> nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision
> is 2**24
>
> reference time is CF11E520.7F853A72 (18:41:20.498 EDT Mon Feb 1 2010)
>
> clock offset is 0.0000 msec, root delay is 0.00 msec
>
> root dispersion is 0.00 msec, peer dispersion is 0.00 msec
>
> loopfilter state is 'CTRL' (Normal Controlled Loop), drift is 0.000000000
> s/s
>
> system poll interval is 16, last update was 5 sec ago.
>
> SDCVWRT-5204-2#show ntp assoc
>
>
>
> address ref clock st when poll reach delay
> offset disp
>
> *~127.127.1.1 .LOCL. 7 11 16 377 0.000 0.000 0.227
>
> * sys.peer, # selected, + candidate, - outlyer, x falseticker, ~
> configured
>
> SDCVWRT-5204-2#
>
> SDCVWRT-5204-2#show clock
>
> 18:41:59.298 EDT Mon Feb 1 2010
>
> SDCVWRT-5204-2#
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> bounces at puck.nether.net] On Behalf Of Jonathan Charles
> Sent: Monday, February 01, 2010 5:38 PM
> To: Arnold Lesar
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] how to Change date / time in cisco IP
> Phone 7961
>
>
>
> If the clock on the router is correct (and a timezone is specified),
> then the problem may be that the phone's aren't using it.
>
> If CCME, go into telephony-service and create cnf-files and reset
> the phone.
>
>
>
> Jonathan
>
> On Sun, Jan 31, 2010 at 10:15 PM, Arnold Lesar <arnoldlesar at yahoo.co.uk
> > wrote:
>
> Hello guys,
>
>
> i have a little problem with my my cisco ipphone 7961
> i try to create NTP server but i don't understand how to use NTP
> server
> my question is:
> 1. is it okay to make core switch become NTP server or i need
> another server to create NTP server?
> 2. I read troubleshooting in cisco.com but i don't understand,
> does anyone can give another easy step by step to change time
> stamp or date/time in cisco IP Phone 7961?
>
>
> For information this is my NTP Status and my NTP Association
>
> VG-3825#sh ntp stat
> Clock is unsynchronized, stratum 16, no reference clock
> nominal freq is 250.0000 Hz, actual freq is 249.9878 Hz, precision
> is 2**18
> reference time is CF10B74A.0A7ECFBB (09:13:30.040 JAVT Mon Feb 1 2010)
> clock offset is -43.4849 msec, root delay is 2.40 msec
> root dispersion is 98.54 msec, peer dispersion is 0.50 msec
> VG-3825#sh ntp ?
> associations NTP associations
> status NTP status
>
> VG-3825#sh ntp as
> VG-3825#sh ntp associations
>
> address ref clock st when poll reach delay
> offset disp
> ~172.31.xx.x 172.31.xx.x 7 61 64 0 2.4 -43.48 16000
> .
> * master (synced), # master (unsynced), + selected, - candidate, ~
> configured
> VG-3825#
>
> GBU
>
> Regards,
>
>
>
> Arnold Samuel Lesar
>
>
>
> ------------------------------------------------------
> Note: This message was created by ARNOLD SAMUEL LESAR.
> ------------------------------------------------------
>
>
>
> ---
> ---
> --------------------------------------------------------------------
> ---
> ---
> --------------------------------------------------------------------
> PT. PELITA RELIANCE INTERNATIONAL
> Eka Hospital BSD City, Tangerang
> Address : CBD Lot IX, BSD City, Tangerang
> Phone : (+62-21) 256 555 55
> Fax : (+62-21) 256 555 44
> ---
> ---
> --------------------------------------------------------------------
> ---
> ---
> --------------------------------------------------------------------
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> Disclaimer: This e-mail communication and any attachments may
> contain confidential and privileged information and is for use by
> the designated addressee(s) named above only. If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of this
> email or its contents is strictly prohibited and may be unlawful. If
> you have received this communication in error, please notify us
> immediately by replying to this message and deleting it from your
> computer. Thank you.
>
>
>
> Disclaimer: This e-mail communication and any attachments may
> contain confidential and privileged information and is for use by
> the designated addressee(s) named above only. If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of this
> email or its contents is strictly prohibited and may be unlawful. If
> you have received this communication in error, please notify us
> immediately by replying to this message and deleting it from your
> computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100202/d08c5fe6/attachment.html>
More information about the cisco-voip
mailing list