[cisco-voip] FW: D channel out of service (addendum)

[Jeff Ruttman]

Outbound calls also don't work.  I forgot I had them going out an
alternate site's PRI.
 
Doing a sho controller shows all kinds of errors:  line code violations,
slips, errored secs, bursty err secs, etc.  Log shows  the serial
interface 0/0/0:23 up but all the serial 0/0/0:1 - 22 to be down.  This
was after I reset the GW the morning.
 
Sound like a telco problem?  I have ticket in.
 
Thanks
jef

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Ruttman
Sent: Thursday, February 11, 2010 8:28 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] D channel out of service


Greetings,
 
We have a site with a PRI and we have MGCP gateways configured.  Inbound
calls give a slow busy.  Outbound calls are OK.  Interface is up up.  GW
is registered.  After a shut no shut on the port and GW reset, port
comes up and GW registers just fine.  Then I get an RTMT  Mgcp D channel
out of service.
 
I'm thinking this is a telco problem?  Is there anything I should be
doing on my end?
 
Thanks
jeff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100211/c5c27a04/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT2014283.txt
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100211/c5c27a04/attachment.txt>