[cisco-voip] Manipulating MWI by XML

[Matthew Saskin]

Last I looked at the developer's guide there's no way to change MWI on the
IP phone via XML posts.

Matthew Saskin
msaskin at gmail.com
203-253-9571

July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin


On Fri, Feb 26, 2010 at 3:02 PM, Bill Simon <bills at psu.edu> wrote:

> Does anybody know how to manipulate the MWI on a phone through an XML
> command to the phone itself?  For example, instruct it to turn on, off, or
> blink.  Sending an instruction to the phone to dial the MWI toggle code
> configured in Call Manager is not suitable in this case.
>
> Thanks
> Bill
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100226/94a26b8e/attachment.html>