[cisco-voip] Manipulating MWI by XML

Lelio Fulgenzi lelio at uoguelph.ca
Fri Feb 26 16:37:10 EST 2010


this gives you some examples or at least psuedocode 

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/xsi/5_1/english/programming/guide/ip5_1apa.html 

i'd use the execute sample, then use the dial option and dial your MWI on/off number. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Bill Simon" <bills at psu.edu> 
To: "Cisco Voip" <cisco-voip at puck.nether.net> 
Sent: Friday, February 26, 2010 3:02:33 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Manipulating MWI by XML 

Does anybody know how to manipulate the MWI on a phone through an XML 
command to the phone itself? For example, instruct it to turn on, off, 
or blink. Sending an instruction to the phone to dial the MWI toggle 
code configured in Call Manager is not suitable in this case. 

Thanks 
Bill 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100226/30618187/attachment.html>


More information about the cisco-voip mailing list