[cisco-voip] CUE Licence Upgrade Problem

[Mike Lydick]

Did you run the install command?

software install clean {pkg}

to verify the pkg name and that the download is complete you can run

software download status

Best Regards,

Mike Lydick




On Sat, Feb 27, 2010 at 7:07 AM, davidytk <davidytk at netvigator.com> wrote:

>  Dear all
>
>
>
> I tried to upload the licence (support CUCM) for CUE. After reload, the
> licence information is still same before.
>
> Then I tried to upload the licence (support CME) for CUE (more mailbox
> support). The result is same, not change the licence information
>
> Below is the CUE information
> cue# show software licenses
> Installed license files:
> - voicemail_lic.sig : ENGINEERING 12 MAILBOX LICENSE
>
> Core:
> - Application mode: CCME
> - Total usable system ports: 6
>
> Voicemail/Auto Attendant:
> - Max system mailbox capacity time: 840
> - Default # of general delivery mailboxes: 5
> - Default # of personal mailboxes: 12
>
> - Max # of configurable mailboxes: 17
>
> Interactive Voice Response:
> - Max # of IVR sessions: Not Available
>
> Languages:
> - Max installed languages: 1
> - Max enabled languages: 1
>
> I tried to use the following command to upload licence
> softwrae download clean url
> ftp://20.0.0.1/cue-vm-license_12mbx_ccm_7.0.1.pkg username user password
> password
>
> Then reload.
>
> Is there any tricky tip for uploading the licence or my CUE cannot upgrade
> the licence ?
>
> Thanks
> David
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100227/ec15c540/attachment.html>