[cisco-voip] how to add specific IP route in CCM 7.x

[Peter Slow]

Tim,
   You can check the filesystems using the Recovery CD. The ISO for it
is available for download from CCO. It's generally used to run fsck
after a power outage or other failure, but I suppose you could use it
before that sort of thing occurred =)

-Pete

On Sun, Jan 3, 2010 at 9:27 AM, Tim Reimers <treimers at ashevillenc.gov> wrote:
>
> Not really at the kernel level, but certainly at the OS level.
>
> To add a route for 10.13.21.X/24 to a UCM on the 192.168.10.X network, it'd
> look like this:
>
> route add -net 10.13.21.0 netmask 255.255.255.0 gw 192.168.10.254 eth0
>
> It really wouldn't be a big deal for Cisco to create an interface in which
> you could enter the parameters for that one command and add it safely. A
> large number of linux-backend web-configured devices
> (like all the Barracuda products) have a section of their web interface for
> configuring routing,
> without having to allow access to the shell, which is dangerous (maybe less
> so for us early-adopters of the penguin or something like Xenix)
>
> It'd certainly be useful to be able to see the output of something like
> 'fsck /dev/sda2' and various things like that.
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net on behalf of Mike Thompson
> Sent: Sat 1/2/2010 10:39 PM
> To: 'Kresimir Plasc'; 'Jason Aarons (US)'; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] how to add specific IP route in CCM 7.x
>
> That's a change made on the Unix / Linux Kernel level which we don't have
> access to on the UCM servers.
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kresimir Plasc
> Sent: Saturday, January 02, 2010 2:34 PM
> To: Jason Aarons (US); cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] how to add specific IP route in CCM 7.x
>
>
>
> Thanks for information Jason,
>
>
>
> I have to find workaround with more specific routers on Internet gateway
>
>
>
> Kresimir
>
>         ----- Original Message -----
>
>         From: Jason Aarons (US) <mailto:jason.aarons at us.didata.com>
>
>         To: Kresimir Plasc <mailto:kresimir.plasc at gmail.com>  ;
> cisco-voip at puck.nether.net
>
>         Sent: Saturday, January 02, 2010 6:00 PM
>
>         Subject: RE: [cisco-voip] how to add specific IP route in CCM 7.x
>
>
>
>         Route with your router, you can't modify the routes in the CCM 7x
> Platform.
>
>
>
>         From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kresimir Plasc
>         Sent: Saturday, January 02, 2010 7:50 AM
>         To: cisco-voip at puck.nether.net
>         Subject: [cisco-voip] how to add specific IP route in CCM 7.x
>
>
>
>         Hi folks,
>
>
>
>         Is anyone knew how and where to add specific ip route in my CCM 7.0
> for some networks?
>
>         I have 2 default gateways and I have to route internet traffic to
> one gateway and local traffic to second gateway
>
>
>
>
>
>         Thanks
>
>         Plaky
>
>
>
> ________________________________
>
>         Disclaimer: This e-mail communication and any attachments may
> contain confidential and privileged information and is for use by the
> designated addressee(s) named above only. If you are not the intended
> addressee, you are hereby notified that you have received this communication
> in error and that any use or reproduction of this email or its contents is
> strictly prohibited and may be unlawful. If you have received this
> communication in error, please notify us immediately by replying to this
> message and deleting it from your computer. Thank you.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>