[cisco-voip] Test environment

[Bill Talley]

I've done this in the past without issue between two UCM 4 clusters  
(LAB and production clusters) so I can verify that it works.  Don't  
recall having to do anything special though.

Sent from my iPhone

On Jan 15, 2010, at 7:36 AM, "Huffman, Tim"  
<thuffman at rosettastone.com> wrote:

> I don’t currently have any POTs lines available for my CUCM test env 
> ironment, so I’m using my production CUCM with an ATA to provide an  
> analog line to my MGCP Gateway in my test environment.  I can’t get  
> the MGCP FXO port to register in CUCM, is this because I’m using an  
> ATA instead of true POTs lines?  Is this not possible to do?
>
>
>
> Thanks,
>
>
>
> Tim Huffman
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100115/96fa6022/attachment.html>