[cisco-voip] Software to rebuild a PUB / SUB

Lelio Fulgenzi lelio at uoguelph.ca
Wed Jan 20 11:02:04 EST 2010


And let it be a further lesson to ensure you have the latest media for your current version. If when you upgrade from 7.x to 7.y or 7.y to 7.z, spend the few bucks and get a media kit. It's only a couple of hundred bucks list. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Scott Voll" <svoll.voip at gmail.com> 
To: lelio at uoguelph.ca 
Cc: "Ryan Ratliff" <rratliff at cisco.com>, "Cisco VoIPoE List" <cisco-voip at puck.nether.net> 
Sent: Wednesday, January 20, 2010 10:57:45 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Software to rebuild a PUB / SUB 

let it be a lesson to always keep your old media until you upgrade. 


Scott 


On Tue, Jan 19, 2010 at 8:55 PM, < lelio at uoguelph.ca > wrote: 


Last time I checked, which wasn't too long ago, media was no longer available via PUT. I needed 7.1(3) for the new HP DL380G6 and we only had 7.0(1). 

We had to order with a SKU and pay the media cost of a hundred bucks I think. 


Lelio Fulgenzi, Senior Analyst 
Computing & Communications 
University of Guelph 
519-824-4120 x56354 

...sent from my iPod - please pardon my fat fingers ;) 

[XKJ2000] 




On 2010-01-12, at 5:08 PM, Ryan Ratliff < rratliff at cisco.com > wrote: 



Yes you would order it via PUT and get the 7.1.3 media shipped to you. 

You can simply do the upgrade during install with the 7.1.2 DVD and the 7.1.3 upgrade file. At the beginning of the install it asks if you want to do an upgrade, select yes. 

-Ryan 

On Jan 12, 2010, at 4:57 PM, Mike King wrote: 

I'm still dealing with my dead SUB issue from a few days ago. Cisco is now hinting that it may be a misconfiguration during the initial install, or serious hardware failure. (The pub and the sub are not syncing databases) 

anywhooo.... They're hinting I might need to rebuild again. 

Last time, we ran the 7.1.2 dvd's that we got, and then did the upgrade to 7.1.3. 

Is it possible to get the 7.1.3 DVD ISO right off of Cisco? i.e. skip a step and go right to correct release? 

I was just on cisco's download site, and there is a link to the ordering page. Does this mean I have to order a DVD? 

Mike 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100120/f0a801bf/attachment.html>


More information about the cisco-voip mailing list