[cisco-voip] MGCP and UCCE DTMF relay?

[Jason Aarons (US)]

When using MGCP PRI T1/CallManager 7.1(3) with Unified Contact Center Enterprise 7.5, are there are particular MGCP DTMF commands I should be using?

I have a script that works when I call the Route Point directly from a 7961 phone (uses SCCP for dtmf), but calls coming in MGCP gateway the DTMF menu choices don't work.  The prompt is interrupted when I choose a DTMF menu option, but the prompt just loops.




-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100706/806273ac/attachment.html>