[cisco-voip] Transfer to CTI

[kapil atrish]

Check Call Routing rules >> Forwarded rules.
 

--- On Wed, 7/7/10, Haas, Neal <nhaas at co.fresno.ca.us> wrote:


From: Haas, Neal <nhaas at co.fresno.ca.us>
Subject: Re: [cisco-voip] Transfer to CTI
To: "'Steve G'" <smgustafson at gmail.com>
Cc: "'cisco-voip at puck.nether.net'" <cisco-voip at puck.nether.net>
Date: Wednesday, July 7, 2010, 1:52 AM






OK, I have created a 10 new voicemail ports with the pilot of 12489. I call it and have created a new tree I can call this number and I get everything I wanted.
 
Now I forward a phone to 12489 and it does not work.
I created a new translation patter of 12488, that translates to 12489. Call 12488 it works, call forward all on a phone to 12488 , No Joy! Will not go to the call tree, it asks for an extension number! 
 
What am I doing wrong here?
 
 
Neal Haas
 
 
From: Steve G [mailto:smgustafson at gmail.com] 
Sent: Tuesday, July 06, 2010 10:46 AM
To: Haas, Neal
Cc: Jobe Gates; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Transfer to CTI
 
Setup an Alternate greeting and set the recording to blank.  Send caller to greeting for the call tree that you would like.

On Tue, Jul 6, 2010 at 10:40 AM, Haas, Neal <nhaas at co.fresno.ca.us> wrote:


The System call handler works without an issue if you call it normally, but they have people out today and want to forward all calls to a new call tree. It is not forwarding to the call tree, but leaving the message on the voicemail. Which they do not want!
 
Thanks for the help

 

Neal Haas
 
1020 S 10th St 
Fresno, CA  93702 
Desk 559.600.5890
 


From: Jobe Gates [mailto:jobe at gates-tribe.com] 
Sent: Tuesday, July 06, 2010 10:34 AM
To: Haas, Neal
Cc: Steve G; cisco-voip at puck.nether.net



Subject: Re: [cisco-voip] Transfer to CTI


 

If you are using a Call Handler set the extension it the same as the CTI Route point.

Thanks,

Jobe


On Jul 6, 2010, at 1:03 PM, "Haas, Neal" <nhaas at co.fresno.ca.us> wrote:



So how would I solve this issue? Any thoughts? Should I setup this line as a voicemail port? I am not sure what to do at this point.
 
Neal Haas
 
1020 S 10th St 
Fresno, CA  93702 
Desk 559.600.5890
 
From: Steve G [mailto:smgustafson at gmail.com] 
Sent: Tuesday, July 06, 2010 9:55 AM
To: Haas, Neal
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Transfer to CTI
 
If the CTI RP is forwarding all calls to Unity, then it would hit the phones mailbox because that is the original called number.

On Tue, Jul 6, 2010 at 9:25 AM, Haas, Neal <nhaas at co.fresno.ca.us> wrote:


I am trying to forward some phones to a CTI route point. When I call the phone it will not forward to the CTI route point, but instead goes to the phones mail box? How do I solve this so that it forwards to the CTI route point.
 
The CTI Route point is actually a phone tree on Unity conn.,
 
Neal Haas
County Of Fresno
IT Analyst - ITSD, Communications
1020 S 10th St
Fresno, CA  93702 
Desk 559.600.5890
 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 
-----Inline Attachment Follows-----


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100706/b10cde12/attachment.html>