[cisco-voip] BRI Problem

[Cheng, Karen]

Have your tried sending a different bearer cap type? if so have you contacted the carrier to see what subscription they have you set to? From Cisco's point of view that error code means the bearer cap requested is correct but you are not allowed to use it.....


Regards

Karen Cheng
Voice Network Engineer
 <http://www.racq.com.au>




From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of H, Tim
Sent: Friday, 9 July 2010 9:44 PM
To: cisco-voip
Subject: [cisco-voip] BRI Problem

Any good ideas on this one?  CUCM 7.13 w/MGCP 2911 gateway using Japan, NTT, BRI Interfaces.  I'm able to make inbound calls with no issues.  Outbound gives me this and then fast busy:

003607: Jul  9 09:52:58.795 UTC: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8  callref = 0x01
        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0x8A
                Exclusive, B2
        Calling Party Number i = 0x0081, '<removed number>'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0x80, '<removed number>'
                Plan:Unknown, Type:Unknown
003608: Jul  9 09:52:58.899 UTC: ISDN BR0/0/0 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x81
        Cause i = 0x82B9B9A3 - Bearer capability not presently authorized
003609: Jul  9 09:53:52.791 UTC: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/0, TEI 68 changed to down
003610: Jul  9 09:53:52.791 UTC: ISDN BR0/0/0 Q931: L3_ShutDown: Shutting down ISDN Layer 3
003611: Jul  9 09:53:52.791 UTC: ISDN  **ERROR**: L2_Mail: DLCB is NULL for event 0x211 dest_is 768
003612: Jul  9 09:53:52.843 UTC: %LINK-3-UPDOWN: Interface BRI0/0/0, changed state to down

Thanks,

Tim


Join us at MotorFest on 11 July 2010 at Eagle Farm Racecourse. Visit www.racq.com/motorfest for more information

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100709/61e5464b/attachment.html>