[cisco-voip] BRI Problem
H, Tim
TimH at trstone.com
Fri Jul 9 21:44:25 EDT 2010
I took out hostnames, IPs, etc, but you should be able to get the idea. I tried messing with the input gain on the voice port, but no luck. It sounds what Cisco calls "Fuzzy Voice" almost. Except extremely bad. I'm only using the first BRI interface for now.
TOK-VGW-RTR#show run
Building configuration...
Current configuration : 9318 bytes
!
! Last configuration change at 01:34:15 UTC Sat Jul 10 2010
! NVRAM config last updated at 01:34:16 UTC Sat Jul 10 2010
!
version 15.0
service nagle
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname TOK-VGW-RTR
!
boot-start-marker
boot-end-marker
!
! card type command needed for slot/vwic-slot 0/3
logging buffered 64768
logging console critical
enable secret 5
!
no aaa new-model
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-participate wic 2
!
no ipv6 cef
no ip source-route
ip cef
!
!
ip multicast-routing
ip dhcp bootp ignore
!
!
no ip bootp server
no ip domain lookup
ip domain name
multilink bundle-name authenticated
!
!
!
!
isdn switch-type ntt
!
!
trunk group BRIs
description 6 BRIs from NTT
!
!
voice-card 0
dsp services dspfarm
!
!
voice rtp send-recv
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!
!
!
!
license udi pid CISCO2911/K9 sn
!
!
archive
log config
logging enable
logging size 500
notify syslog contenttype plaintext
hidekeys
path flash0:archive-config
maximum 6
time-period 1440
username
!
redundancy
!
!
ip tftp source-interface Loopback0
!
!
!
!
interface Loopback0
ip address
!
interface Null0
no ip unreachables
!
interface GigabitEthernet0/0
description
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/1
description Conn to 3560_Core_G0/2
ip address 255.255.255.252
no ip redirects
no ip proxy-arp
ip pim sparse-dense-mode
ip authentication mode eigrp 100 md5
ip authentication key-chain eigrp 100 EIGRP_CHAIN
load-interval 30
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/0/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
trunk-group BRIs 1
!
interface BRI0/0/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
trunk-group BRIs 1
!
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
trunk-group BRIs 1
!
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
trunk-group BRIs 1
!
interface BRI0/2/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
trunk-group BRIs 1
!
interface BRI0/2/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
trunk-group BRIs 1
!
!
router eigrp 100
default-metric 100000 100 255 1 1500
network 0.0.255.255
passive-interface default
no passive-interface GigabitEthernet0/1
eigrp router-id
!
no ip forward-protocol nd
no ip forward-protocol udp bootps
no ip forward-protocol udp tftp
no ip forward-protocol udp domain
no ip forward-protocol udp time
no ip forward-protocol udp netbios-ns
no ip forward-protocol udp netbios-dgm
no ip forward-protocol udp tacacs
!
no ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
ip access-list standard SNMP-RW
permit 10.1.2.102
!
logging source-interface Loopback0
logging 10.40.112.201
logging 10.1.2.94
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 98 permit 10.1.2.102
!
!
control-plane
!
!
voice-port 0/0/0
echo-cancel coverage 64
cptone JP
!
voice-port 0/0/1
echo-cancel coverage 64
cptone JP
!
voice-port 0/1/0
echo-cancel coverage 64
cptone JP
!
voice-port 0/1/1
echo-cancel coverage 64
cptone JP
!
voice-port 0/2/0
echo-cancel coverage 64
cptone JP
!
voice-port 0/2/1
echo-cancel coverage 64
cptone JP
!
ccm-manager fallback-mgcp
ccm-manager redundant-host
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server
ccm-manager config
!
mgcp
mgcp call-agent 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/1
mgcp bind media source-interface GigabitEthernet0/1
!
mgcp profile default
!
sccp local GigabitEthernet0/1
sccp ccm identifier 2 version 7.0
sccp ccm identifier 1 version 7.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register MTP_JAPAN
associate profile 1 register CFB_JAPAN
!
dspfarm profile 2 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 4
associate application SCCP
!
!
!
!
gatekeeper
shutdown
!
!
line con 0
login local
line aux 0
line vty 0 4
privilege level 15
password 7
login
transport input all
line vty 5 15
privilege level 15
password 7
login
transport input all
!
scheduler allocate 20000 1000
ntp logging
ntp source Loopback0
ntp update-calendar
ntp server prefer
ntp server
ntp server
end
Tim
From: James Buchanan [mailto:jbuchanan at ctiusa.com]
Sent: Friday, July 09, 2010 9:28 PM
To: H, Tim; Nicholas Samios; cisco-voip
Subject: RE: [cisco-voip] BRI Problem
Could you send a config?
James Buchanan | Senior Network Engineer | South Region | Presidio Networked Solutions
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com<mailto:jbuchanan at ctiusa.com>
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com<http://www.presidio.com> <http://www.presidio.com>
CCIE #25863, Voice
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of H, Tim
Sent: Friday, July 09, 2010 7:42 PM
To: Nicholas Samios; 'cisco-voip'
Subject: Re: [cisco-voip] BRI Problem
This resolved the issue of my outbound not working correctly. All inbound and outbound calls will connect, but all you hear is static. Am I missing another command here?
Thanks,
Tim
From: Nicholas Samios [mailto:nsamios at staff.iinet.net.au]
Sent: Friday, July 09, 2010 6:09 AM
To: H, Tim; 'cisco-voip'
Subject: RE: BRI Problem
The telco is rejecting your setup as you're sending call stack as alaw, Japan uses ulaw.
Conf t
Voice-port slot/port:D
Compand-type u-law
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of H, Tim
Sent: Friday, July 09, 2010 7:44 PM
To: cisco-voip
Subject: [cisco-voip] BRI Problem
Any good ideas on this one? CUCM 7.13 w/MGCP 2911 gateway using Japan, NTT, BRI Interfaces. I'm able to make inbound calls with no issues. Outbound gives me this and then fast busy:
003607: Jul 9 09:52:58.795 UTC: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8 callref = 0x01
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x8A
Exclusive, B2
Calling Party Number i = 0x0081, '<removed number>'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '<removed number>'
Plan:Unknown, Type:Unknown
003608: Jul 9 09:52:58.899 UTC: ISDN BR0/0/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x81
Cause i = 0x82B9B9A3 - Bearer capability not presently authorized
003609: Jul 9 09:53:52.791 UTC: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/0, TEI 68 changed to down
003610: Jul 9 09:53:52.791 UTC: ISDN BR0/0/0 Q931: L3_ShutDown: Shutting down ISDN Layer 3
003611: Jul 9 09:53:52.791 UTC: ISDN **ERROR**: L2_Mail: DLCB is NULL for event 0x211 dest_is 768
003612: Jul 9 09:53:52.843 UTC: %LINK-3-UPDOWN: Interface BRI0/0/0, changed state to down
Thanks,
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100709/57aa8863/attachment.html>
More information about the cisco-voip
mailing list