[cisco-voip] Will load server parameter work for 69XX series phones? Is it a half duplex speakerphone?

[Ki Wi]

Thanks a lot Ryan.

>From my testing, it seems like 7945 it's able to do tx/rx on the
speakerphone at the same time while 69xx, only 1 party can talk at each time
somehow while on speakerphone mode. Will open a SR if i confirm the
behaviour.

On Thu, Jul 22, 2010 at 11:36 PM, Ryan Ratliff <rratliff at cisco.com> wrote:

> Yes, the 69XX phones do not currently support load server.  See CSCtg97003.
>
> According to the data sheet it should have a full-duplex speakerphone but
> I'm pretty sure that means it can act as both mic and speaker (as opposed to
> other low-end phones that are speaker only).  If your testing is showing the
> phone does not behave as other full-duplex speakerphones do then I'd get a
> TAC SR open so it can be investigated with the BU.
>
> -Ryan
>
> On Jul 22, 2010, at 11:12 AM, Ki Wi wrote:
>
> I tried on 69XX, it doesn't seems to work while 7945 works. I'm using
> 8.0.2c. Any one faces similar issue?
>
> At the same time, it seems like it's a half duplex speakerphone.
> Example
> User A - 7945
> User B - 6921
>
> When user B set his phone into speakerphone mode, both parties is talking
> at the same time (simultaneously). User A will not hear User's B voice at
> all (as it's muted) while User B can hear what User A is talking about.
>
> Anyone faced similar issues before?
>
> Regards,
> Ki Wi
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100722/5d9a06c1/attachment.html>