[cisco-voip] Has anyone downgraded an MCS7835I3-K9-CMC2 to 6.1(5)?

[Dana Tong]

Hi all,

 

So I have a customer running a 6.1(4) cluster who've purchased a
MCS7835I3-K9-CMC2 which they'd like to introduce to the cluster. Now
this server comes pre-loaded with 7.1(3) and the hw support matrix says
this server is supported on CUCM 6.1(5), 7.1(3), and 8.0.

 

My question is, how do you get 6.1(5) on this box? Original 6.1(2)
install media fails hardware detection, as does a modified bootable
6.1(5) disk. So how then does one downgrade this server to join an
existing cluster?

 

The TAC have not been able to provide a solution. Would a genuine 6.1(5)
install media work? Is there any way to get the required drivers or
files off a 7.1(3) disk?

 

Thanks

Dana

 


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100603/5c02352f/attachment.html>