[cisco-voip] Change Model of programmed phone in 7.1(3)

[Mike King]

You can do it in 7.1.3.
It's the migrate feature (found on the drop down menu on the top right
hand corner)

I think you have to setup a BAT profile for a phone before you can use
this feature.

Mike

On Fri, Jun 11, 2010 at 10:17 AM, Jason Aarons (US)
<jason.aarons at us.didata.com> wrote:
> Do I recall in 8.0(2c) we can change the model of phone say 7942 to 7962?
> But you can’t do it in 7.1?
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>